Examine A Voice - E-Mu ProteusX Operation Manual

Examine a Voice

Each voice has its own synthesizer section (called Voice Processing) to process the raw
samples. You can process each voice separately or select all voices to be processed in the
same way.
Go to the Tree and click on preset P0015 Dana-him. Play the keyboard. You should
1.
be able to hear the preset.
Open the preset by clicking on the plus sign(+), then click on the Voice Processing
2.
icon. The Voice Processing page shown below appears.
Step 3.
Select All
Near the top of the screen near the keyboard you'll see the Group Selector. Set this
3.
to All, to select all voices in the preset.
Feel free to explore the synthesizer section. The filter section is probably a good
4.
place to begin. Change the filter type, then adjust the frequency and Q controls as
you play the keyboard. Note that the filter response display changes as you change
the filter settings.
Cords
One reason synthesizers are able to generate such complex sounds is because most, if
not all, of their processes can be placed under automatic control. Here's an example.
Tired of turning the filter frequency by hand? Let's program one of the LFOs to do it.
5.
Choose Cord #8 and set the left selection box to LFO 1 ~.
E-MU Systems
Step 5
Set to LFO 1 ~ Set to Filter Frequency
Step 6
E
page 62
information on how to
select groups of voices.
3 - Getting Started
Examine a Voice
Note: See Groups on
for detailed
39