Table of Contents
Advertisement
7 - Effects
Aux FX Screen
Aux FX Screen
All effects have a wet/dry mix parameter to control the ratio of effected-to-plain signal,
which is stored with the FX preset. The effect parameters vary with the type of effect.
Generally, when using the Aux Effects, the wet/dry mix in the effect should be set to
100% wet since the Aux Send amount controls how much effect will be applied.
Aux Effects
Wet/Dry Mix
Control
Effect
Parameters
Effects List
Aux 1-3 Select
Output View
Wet/Dry Mix Control
Effect Bypass
Effect Parameters
Aux FX Send Amounts
The Aux Send Amounts can be controlled either from the Preset Cords or from within
each Voice. Refer to the FX Routing Diagram on
Delay Time, Feedback, etc., can not be externally controlled.
110
Aux1-3
Output
Select
View
Click on the Effects List icon
Select between Aux 1, Aux 2, or Aux3 FX in the TV view.
Selects the Main Output Window. See
Window. (Note: This button is disabled in "Single" mode.)
Adjusts the ratio of effected signal to un-effected signal.
When this button is selected (Red), the effect is completely
bypassed, allowing you to hear only the uneffected signal.
Each effect has its own set of user adjustable controls.
page
Effects List
Effect
Bypass
to show the list of effects.
Main Output
105. Aux Effect parameters, such as
Proteus X Operation Manual
Advertisement
Table of Contents
