Voice Effect Sends - E-Mu ProteusX Operation Manual

Table of Contents

Voice Effect Sends

Each voice has one Main Output level control which feeds a Wet/Dry mixer, and three

Aux Send level controls. The Wet/Dry outputs from all voices in the preset are summed

into the Preset FX. The output of the Preset FX section can be mixed into the Main and

Aux 1-3 outputs. The Main Output of the Preset FX goes directly to the channel's main

stereo output. The Aux Outputs of the Preset FX are summed together with the Aux

Output signals from all the voices.

All the Aux Sends 1-3 from all voices and channels are summed with Aux Outputs 1-3

from the Preset FX and then feed the Aux FX processors located on the Multisetup page.

See page 55.

The outputs of the Aux FX processors (which may be bypassed) feed the

Aux Output section, where they can be directed to any available ASIO output.

The Aux Output On/Off button to the right of each channel main output allows you to

turn the Aux Sends on or off for that channel so you can hear the channel with or

without effects.

Wet/Dry

wet

dry

Main

Voices

per

VOICE

The Voice Effect Send levels and the Wet/Dry mix can be controlled using the voice

modulation cords.

See "Send Aux 1-3" on page 94.