Removal Of Fan Motor - Daikin H Series Service Manual

Outdoor Unit
2.4

Removal of Fan Motor

Procedure
Step
1 Cut the clamps at 2
locations.
2 Remove the 2 lower
screws first.
3 Then, remove the 2
upper screws.
4 Remove the fan motor.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
2
1
Fan motor
(R9630)
 Be sure to remove the lower
screws first. If the upper screws
are removed first, the fan motor,
the center of gravity of which is
toward the front, may tilt down
or fall, causing injury.
(R6442)
 When reassembling, be sure to
place the wire harness lower.
Harness
(R6443)
SiUS04-924_A
Points
(R6444)
173