Econo Operation - Daikin H Series Service Manual

SiUS04-924_A
2.8

ECONO Operation

ECONO Operation

NOTE
 Notes on ECONO operation
• ECONO operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and the
" " is no longer displayed on the LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the level of power consumption is already low, ECONO operation will not drop the power consumption.
54
ECONO operation is a function which enables efficient operation by limiting the
maximum power consumption value.
This function is useful for cases in which attention should be paid to ensure a circuit
breaker will not trip when the product runs alongside other appliances.
 To start ECONO operation
Press during operation.
• " " is displayed on the LCD.
 To cancel ECONO operation
Press again.
• " " is no longer displayed on the LCD.
Running current and
power consumption
Normal
operation
ECONO
mode
• This diagram is a representation for illustrative purposes only.
The maximum running current and power consumption of the air conditioner in ECONO
operation vary with the connecting outdoor unit.
Maximum during
normal operation
Maximum during
ECONO mode
Time
From start up until set
temperature is reached
Operation Manual
Operation Manual