SiMX042215E
4.4
Indoor Fan Motor (DC Motor) or Related Abnormality
A6
Error Code
Method of Error
The rotation speed detected by the microcomputer during fan motor operation is used to
Detection
The fan motor stops its rotation within 5 seconds after the operation starts.
Error Decision
The detected rotation speed does not reach the demanded rotation speed of the target tap, and
Conditions
is less than 50% of the maximum fan motor rotation speed.
Supposed
Remarkable decrease in power supply voltage
Causes
Layer short inside the fan motor winding
Breaking of wire inside the fan motor
Breaking of the fan motor lead wires
Defective indoor unit PCB
Part 6 Service Diagnosis
determine abnormal fan motor operation.
Troubleshooting
59