Removal Of Pcbs - Daikin H Series Service Manual

Indoor Unit
1.4

Removal of PCBs

Procedure
Step
1. Remove the signal
receiver PCB.
1 Cut the clamp.
2 Release the harness
from the hook.
3 Push and unfasten the
hook of the signal
receiver unit.
Removal Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Clamp
Hook
Hook
Signal
receiver
unit
Points
(R9513)
 When reassembling, make sure
to hook the harness.
(R9514)
(R13518)
SiUS04-924_A
133