Troubleshooting
4.16 Compressor System Sensor Abnormality
H0
Remote
Controller
Display
The system checks the supply voltage and the DC voltage before the compressor starts.
Method of
The system checks the compressor current right after the compressor starts.
Malfunction
Detection
The supply voltage and the DC voltage is obviously low or high.
Malfunction
The compressor current does not run when the compressor starts.
Decision
Conditions
Disconnection of reactor
Supposed
Disconnection of compressor harness
Causes
Defective outdoor unit PCB
Defective compressor
Service Diagnosis
SiUS04-924_A
91