Table of Contents
Advertisement
You can find instructions on replacing the filter and fan in the following sections:
• UC 100 maintenance (Page 157)
• UC 200 maintenance (Page 161)
• UC 300/400 maintenance (Page 165)
See also
About the operating instructions (Page 7)
10.3
Cleaning the touch screen
The touch screen is designed for low-maintenance operation. Clean the touch screen regularly
to keep it in top condition.
Electric shock due to water ingress
Water entering the charging station can damage the charging station. If the unit is damaged,
dangerous voltages may be present on the cabinet or exposed components, which can cause
serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a high-pressure cleaner, steam jet or water jet when cleaning the charging
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the touch screen of the charging station.
• Therefore, do not use solvents.
• Also, never use aggressive or abrasive cleaning agents.
Note
Only clean when the touch screen is switched off
If you clean the touch screen when it is switched on, you may cause operating errors. This can
unintentionally put the charging station into an undesirable operating state.
• Before cleaning the touch screen, switch off the charging station.
Permitted cleaning agents and tools
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. Mild detergents
include dishwashing liquids.
• Use only soft cleaning cloths.
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC
WARNING
station.
WARNING
Maintenance and service
10.3 Cleaning the touch screen
155
Advertisement
Table of Contents
