Alarm Message "Cabinet's Door Opened - Siemens SICHARGE UC 100 Operating Instructions Manual

Alarm, fault and system messages
9.2 Alarm message "Cabinet's Door Opened"
"Emergency Stop" alarm message
The display shows the "Emergency Stop" alarm message in full screen mode:
Figure 9-1
Emergency stop state
The emergency stop function switches off the power supply to the charging cable. The charging
process is stopped immediately. The charging station switches to the safe emergency stop state.
In the emergency stop state, operation of the charging station is no longer possible for safety
reasons.
Canceling the emergency stop state
Note
Eliminate the hazardous situation
First eliminate the hazardous situation. Cancel the emergency stop state only after doing this.
To cancel the emergency stop state, reset the Emergency Stop button (Page 13).
9.2

Alarm message "Cabinet's Door Opened"

When you open the charging station door, the display shows the following alarm message.
144
Alarm message
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC