Cleaning The Cabinet - Siemens SICHARGE UC 100 Operating Instructions Manual

Maintenance and service
10.4 Cleaning the cabinet
Note
Read the information on chemical resistance
To ensure that the touch screen achieves the longest possible service life, observe the following
information on the chemical resistance of SIMATIC HMI devices:
Information on resistance (https://support.industry.siemens.com/cs/ww/en/view/39718396)
Cleaning the touch screen
Clean the touch screen as follows:
1. Apply cleaning agent to the cleaning cloth.
2. Start cleaning at the edge of the screen.
3. Wipe with the cleaning cloth from the edge of the screen to the inside.
10.4

Cleaning the cabinet

Electric shock due to water ingress
Water entering the charging station can damage the charging station. If the unit is damaged,
dangerous voltages may be present on the cabinet or exposed components, which can cause
serious injury or death if touched.
• Always keep the cabinet doors closed during cleaning.
• Never use a high-pressure cleaner or steam jet when cleaning the charging station.
Damage to property due to improper cleaning agents
Improper cleaning agents can damage the exterior surfaces of the charging station. Therefore,
do not use solvents. Also, never use aggressive or abrasive cleaning agents.
Permitted cleaning agents
• Use a mild, non-corrosive cleaning agent, even in the case of heavy soiling. Mild detergents
include dishwashing liquid.
• Deionized water is particularly suitable for cleaning the unit.
Cleaning the exterior surfaces of the cabinet
• Wipe the exterior surfaces of the charging station with a damp cloth.
• Then rub the charging station dry.
156
WARNING
WARNING
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC