Monitoring The Charging Process - Siemens SICHARGE UC 100 Operating Instructions Manual

Plug in the charging cable
Proceed as follows to plug in the charging cable:
1. Remove the charging plug from the holder on the charging station.
2. If you need more cable length, remove the cable from the cable holder.
3. Insert the charging plug into the vehicle's charging socket.
The charging station automatically locks the plug connection between the charging cable
and the electric vehicle.
Automatic start of the charging process
Once the plug connection is locked, the charging process starts automatically. The charging
station displays the Start menu on the touch screen. Symbols in the status bar show the current
vehicle status and connection status.
①
②
Figure 8-1
8.4

Monitoring the charging process

After you have connected the electric vehicle to the charging station, the charging station
display automatically shows the Start menu. Several display elements provide precise
information about the progress of the charging process.
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC
"Vehicle is charging" symbol
"Connection locked" symbol
Status bar
8.4 Monitoring the charging process
Operating
123