6.5.2
Connecting the power supply cable
To connect the charging station to the distribution network, connect the power cable to the
main switch of the charging station.
Requirements
• You have removed the handle of the main switch.
• You have removed the bottom protective cover.
• You have inserted the power cable into the cabinet.
Connections of the power supply cable
①
②
③
④
Figure 6-18
SICHARGE UC 100, UC 200, UC 300, UC 400, UC 600, UC 800
Operating Instructions, 10/2022, A5E50828019-AC
Terminal L3 (-Q1:6)
Terminal L2 (-Q1:4)
Terminal L1 (-Q1:2)
PE ground connection (PE cabinet)
I/Os
Connecting
6.5 Connecting UC 300/400
103