Terminating The Charging Process - Siemens SICHARGE UC 150 Operating Instructions Manual

8.2.5

Terminating the charging process

The charging process can be ended automatically or manually.
Automatic termination
The following scenarios result in automatic termination of the charging process:
• Vehicle ends charging process
• Vehicle detects a fault
• Charging station detects an internal critical error (internal)
• Emergency off is triggered
– By actuating the emergency stop switch
– By opening the device doors (external)
Manual termination
1. Switch to the detail view of your charging process (Page 65) on the display.
2. Press the "Stop charging" button.
On the display you are asked whether you really want to end the charging process.
Figure 8-5 Confirming termination of the charging process
3. Confirm the dialog with the "Stop charging" button.
To cancel termination of the charging process and resume the charging process, press
"No".
SICHARGE UC 150
Operating Instructions, 10/2022, A5E50068475-AB
Operation
8.2 Operation via HMI
67