Konica Minolta bizhub C658 Service Manual page 1992

bizhub C658/C558/C458/C368/C308/C258
(2) *2: TX Stamp setting screen
3.6 Paper path operation
Reading of the back side of the original by the CIS is not done in the 1-sided mode. All other paper feed operations in the 1-sided mode are the
same as those in the 2-sided mode.
[1]
[2]
[3]
[4]
[5]
[6]
[1] Document pick-up roller
[3] Registration roller
[5] Document reading roller/2
[7] Document reading roller/3
1. When the original is set, the document empty sensor detects the leading edge of the original.
2. Pressing the start key will lower the document pick-up roller and the document reading roller/1 will be pressed.
3. The document feed motor is energized, and the document pick-up roller and document feed roller are rotated to start feeding the first
original.
4. When the registration sensor detects the leading edge of the original, a loop is formed in the original.
[8]
[7]
PC THEORY OF OPERATION DF-704 > 3. OPERATION
[2] Document feed roller
[4] Document reading roller/1
[6] CIS module (CIS)
[8] Document exit roller
PC-18