Konica Minolta bizhub C658 Service Manual page 1937

bizhub C658/C558/C458/C368/C308/C258
24. CHANGES IN REFRESH MODEL
24.1 What is the Refresh Model?
• Although the product name is remained same as the previous product name, each section has been improved.
• It can be identified with the serial number (Serial No.) on the manufacturer plate on the main body.
Product name
bizhub C368
bizhub C308
bizhub C258
24.2 Scanner Section
• The following changes are made in the refresh model.
1. The CCD module on the CCD board is changed.
24.2.1 CCD Board
The manufacturer is changed due to disuse of the CCD module. Therefore, the CCD board is changed.
[1]
[3]
[1] CCD module
[3] CCD mounting plate
NOTE
▪ To install the new CCD board to the previous MFP, the functional version of firmware on the MFP must be updated to 4.0 or later.
▪ The CCD board can be identified automatically due to the firmware update.
24.3 Paper Feed Section
Change point
Enabled printing on custom-size paper
Changed mechanism of paper length
guide and paper width guide
24.3.1 Supporting Custom-size Paper
• From the tray 1 and tray 2, printing on custom-size paper is enabled.
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 24.
Item code
A7PUxx7
A7PYxx7
A7R0xx7
[2]
Description
• Enabled printing on custom-size paper from the tray
1 and the tray 2.
• Added settings for detecting custom-size paper.
(Engine FW DIP SW No.19: "ON" by default)
• Supported with the universal design
• When paper is loaded, the ease of operation for
adjusting the paper length guide and the paper
width guide is improved.
• Improvement is made to prevent a mis-setting on
the paper size, and also prevent paper from
bending during paper feed.
O-162
[2] CCD board
- -
Applicable tray
• Tray 1
• Tray 2
• Tray 1
• Tray 2
• Tray 3 (Option)
• Tray 4 (Option)
CHANGES IN REFRESH MODEL
Serial number (Serial No.)
A7PUxx7000001 or later
A7PYxx7000001 or later
A7R0xx7000001 or later