Konica Minolta bizhub C658 Service Manual page 1917

bizhub C658/C558/C458/C368/C308/C258
19.2 Power key
19.2.1 Configuration
[1]
[1] Power key
19.2.2 Operation
(1) Power key functions
• The power key offers two functions, serving as the power save button and the sub-power switch found in conventional models,
depending on how long it is held down.
• In the default setting, holding down the power key for a short time sets the machine into the power save mode (low power mode) and
holding it down for a long time sets the machine into the sub power OFF mode.
• The mode can be changed from the following: [Utility] -> [Administrator Settings] -> [System Settings] -> [Power Supply/Power Save
Settings].
How long the power key is
held down
Short time
Long time
• *1: [Utility] -> [Administrator settings] -> [System Settings] -> [Power Supply/Power Save Settings] -> [Power Key Setting]
• *2: [Utility] -> [Administrator settings] -> [System Settings] -> [Power Supply/Power Save Settings] -> [Power Save Settings]
(2) Status in each mode
Mode
Standby
Power save Low power
mode mode
Sleep mode
*2
(Not reduce)
Sleep mode
*2
(Reduce)
Sleep mode
*2
(High)
Default setting
2
Low power mode *
Sub power OFF mode
All functions are ready to accept and ready to perform jobs.
• Power consumption is limited to a level lower than the standby state with
the fusing temperature control minimized.
• Reset when a job is received or the machine is operated.
• Power consumption is reduced in low power mode.
• Sensors that are used internally are operating.
• Power is supplied only to a portion of the MFP board required for
receiving a job.
• When an original is placed on the scanner, a job is received, or the
machine is operated, the system wakes up.
• Power is supplied only to a portion of the MFP board required for
receiving a job.
• Reset when a job is received or the machine is operated.
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 19.
- -
Settings changed by Administrator Settings
Sleep mode *
Sub power OFF mode *
ErP auto power off mode *
Condition
O-142
POWER SUPPLY SECTION
2
1
1
Power key LED
Lit up blue
Blinking in
blue
Blinking in
blue