Konica Minolta bizhub C658 Service Manual page 1912

bizhub C658/C558/C458/C368/C308/C258
Paper length
216 mm or less
Over 216 mm
(2) During a monochrome print cycle
Stabilization execution
condition *1
Any of the conditions is
met
None of the conditions is
met
• *1: Stabilization execution condition:
• A change in environment is detected. (a change in environment exceeding the threshold value is detected since the last image
stabilization sequence)
• The count of the number of printed pages is 10,000 as counted from the last LD adjustment.
• *2: Stabilization execution condition:
• In the last image stabilization, the value of IDC sensor detection was out of the specified range.
• The last malfunction code occurs.
17.5.4 Service Mode
• Types (modes) of image stabilization to be executed with the menu of the service mode will be described.
(1) Gradation Adjust ([Service Mode] -> [Imaging Process Adjustment] -> [Gradation Adjust])
Type (mode) of image stabilization to be
executed
(2) Stabilizer ([Service Mode] -> [Imaging Process Adjustment] -> [Stabilizer])
Type (mode) of image stabilization to be
executed
17.5.5 Expert Adjustment
• Types (modes) of image stabilization to be executed with the menu of the expert mode will be described.
(1) Gradation Adjustment ([Utility] -> [Administrator Settings] -> [System Settings] -> [Expert Adjustment] ->
[Gradation Adjustment])
Type (mode) of image stabilization to be
executed
(2) Image Stabilization ([Utility] -> [Administrator Settings] -> [System Settings] -> [Expert Adjustment] -> [Image
Stabilization])
Type (mode) of image stabilization to be
executed
17.5.6 Stabilization time (bizhub C368/C308/C258)
Type
Mode 1 bizhub C368
bizhub C308/C258
Other than the above
17.5.7 Stabilization time (bizhub C658/C558/C458)
Mode 1
Other than the above
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 17. IMAGE
2
4
Print count after gamma Stabilization execution
correction condition *2
- -
400 sheets or more Any of the conditions is
met
None of the conditions is
met
Mode 2
Initialize+Image Stabilization
Stabilization Only
Mode 2
Initialize+Image Stabilization
Stabilization Only
Approx. 35 sec.
Approx. 39 sec.
Approx. 20 sec. or less
Type
bizhub C658
bizhub C558
bizhub C458
bizhub C658
bizhub C558
bizhub C458
Count
Color mode
1
2
Stabilization (mode)
Mode 5
Mode 5
Mode 6
Mode 1
Mode 2
Mode 1
Mode 2
Approx. 23 sec.
Approx. 25 sec.
Approx. 29 sec.
Approx. 23 sec. or less
Approx. 25 sec. or less
Approx. 29 sec. or less
O-137
STABILIZATION CONTROL
Monochrome mode
Operation timing during
print
Executed by interrupting
the print cycle
Executed by interrupting
the print cycle
Executed by interrupting
the print cycle
Time
Time