Konica Minolta bizhub C658 Service Manual page 1838

bizhub C658/C558/C458/C368/C308/C258
8.3.7 2nd transfer roller new article detection
• The 2nd transfer roller (hereinafter referred to as the "transfer roller") is not provided with any new article detection mechanism. If the
transfer roller is replaced with a new one, therefore, "New Release" must be performed of the "Transfer Belt Unit" in [Counter] -> [Life] of
the Service Mode. Performing "New Release" of the "Transfer Belt Unit" in life counter of the Service Mode will also reset the life counter of
the transfer roller to zero.
NOTE
▪ For the life of the 2nd transfer roller, refer to
Consumable/part replacement time (bizhub
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 8. 2ND
F.6.1 Consumable/part replacement time (bizhub C368/C308/C258)
C658/C558/C458).
O-63
TRANSFER SECTION
and F.6.2