Konica Minolta bizhub C658 Service Manual page 1897

bizhub C658/C558/C458/C368/C308/C258
15.3 Drive (bizhub C368/C308/C258)
[7]
[6]
[5]
[1] Switchback motor (M4)
[3] Fusing motor (M3)
[5] Gate switch solenoid (SD3)
[7] Reverse roller
15.4 Drive (bizhub C658/C558/C458)
[8]
[7]
[6]
[1] Switchback motor (M4)
[3] Fusing motor (M3)
[5] Paper exit/reverse switch gate
[7] Paper exit roller
15.5 Operation
15.5.1 Transport control
(1) Paper exit by paper exit roller
• If the paper is fed out by way of the paper exit roller, the paper exit roller is rotated forward to transport the paper.
• The initial position of the paper exit/reverse switch gate establishes a paper path through the paper exit roller, so that its position is not
changed.
• The paper exit roller is driven by controlling rotation of the fusing motor with the paper exit clutch.
• The paper exit clutch is energized at timing at which the leading edge of the paper enters the fusing unit.
• The paper exit clutch is deenergized when the paper is fed a predetermined distance after the paper exit roller after the paper exit sensor
has detected the trailing edge of the paper.
O THEORY OF OPERATION bizhub C658/C558/C458/C368/C308/C258 > 15. PAPER
[1]
[2]
[3]
[4]
[2]
[4]
[6]
-
[1]
[2]
[3]
[4]
[5]
[2]
[4]
[6]
[8]
O-122
Paper exit clutch (CL8)
Paper exit/reverse switch gate
Paper exit roller
-
Paper exit clutch (CL8)
Paper exit deceleration clutch (CL9)
Gate switch solenoid (SD3)
Reverse roller
EXIT/REVERSE SECTION