Adding A Destination Number; Turning Message Notification On Or Off - Nortel CallPilot Mini Reference Manual

Adding a destination number

Use this procedure if you have set up Message Notification and you want to add another
destination number. You can have up to five destination numbers.
To add a destination number
1 Dial the CallPilot Messaging access number, then enter your mailbox number and press
2 Enter your mailbox password and press
3
Press
¡ Þ Û
4
Press to set up Message Notification.
Ú
5
Press to continue until the voice prompt announces that the Notification Destination has
£
not been set up.
6
Press to set up another destination number and follow the steps in
Ú
Notification to a telephone number" on page 45
or
"To set up Message Notification to an extension" on page 47
or
"To set up Message Notification to a pager" on page

Turning Message Notification on or off

You can turn Message Notification on or off at any time. If you turn Message Notification off, you
do not affect any of the assigned parameters.
To turn Message Notification on or off
1
Dial the CallPilot Messaging access number, then enter your mailbox number and press
2
Enter your mailbox password and press
3
Press
¡ Þ Û
4 Press to activate or deactivate Message Notification
Ú
or
press to enter the time.
Û
5 Hang up to end the session.
to open the Message Notification menu.
to open the Message Notification menu.
Chapter 7 Message Notification
.
£
48.
.
£
"To set up Message
CallPilot Mini Reference Guide
57
.
£
.
£