Adding Special Characters To A Destination Number - Nortel CallPilot Mini Reference Manual

38 Chapter 6 Outbound Transfer

Adding special characters to a destination number

Special characters are pauses or other dialing instructions that you can add if they are required to
access the network or a destination number.
Follow the voice prompts or press ADD to add special characters to a destination telephone number
(or a destination pager number if you are setting up a destination pager number in Remote
Message Notification.) A destination telephone or pager number cannot be longer than 30
characters.
Note: If you are adding special characters, do not press the dialpad buttons
a #, or
Adding special characters to a destination number
Press
Û
Ü
Ý
Þ
ß
¥
P0989496 03
to enter a *. Listen to the voice prompts for how to enter these characters.
¥
Description
to resume adding digits to the destination telephone number
to enter a timed pause. Pauses are four seconds long.
to recognize dial tone (behind PBX).
to enter a #
*
to enter a
to cancel and retry
to enter
£