Setting Up Message Notification - Nortel CallPilot Mini Reference Manual

Setting up Message Notification

Follow these instructions if you are setting up Message Notification for the first time. If you have
already set up Message Notification, refer to the section
on page 52.
To set up Message Notification to
a telephone number
an extension
a pager
To set up Message Notification to a telephone number
1
Dial the CallPilot Messaging access number, then enter your mailbox number and press
2
Enter your mailbox password and press
3 Press
¡ Þ Û
4 Press to set up Message Notification.
Ú
5 Press to choose a telephone number destination.
Ú
6 Enter the destination telephone number and press
maximum of 30 digits.
7 Press to accept the destination telephone number, or
£
• press
Ú
• press
¥
• press
Û
characters. After you add special characters, press
For more information about special characters, refer to
destination number" on page
8 Enter the start time for Message Notification. You must enter four digits. Any single-digit hour
or minute must be preceded by a zero. For example, enter 0800 for eight o'clock in the
morning, or 1700 for five o'clock in the evening.
9 Press to accept the start time.
£
10 Enter the time when Message Notification is to stop. You must enter four digits. Precede a
single-digit hour or minute with a zero.
11 Press
to accept the stop time.
£
12 Press
if you want to change the destination number
Ú
or
press if you do not want to set up another destination number.
£
13 Press
to accept the start time that you entered
£
or
press to change the start time.
Ú
to open the Message Notification menu.
to review the number
to cancel and reenter the number
to add special characters and use your dialpad or follow the voice prompts to add
38.
Chapter 7 Message Notification
"Changing Remote Message Notification"
refer to
page 45
page 48
page 48
.
£
. The destination telephone number is a
£
to accept the destination number.
£
"Adding special characters to a
CallPilot Mini Reference Guide
45
.
£