Nortel Meridian Meridian 1 Upgrade Manual page 45

Check required tools
Check personnel requirements
Communication Server 1000M and Meridian 1
For a list of required tools, see Table 7.
Table 7
List of recommended tools
— Digital Multimeter (DMM)
— Pliers, needle-nose
— Pliers, standard
— Screwdriver, 3/16" flat blade
— Screwdriver, #2 Phillips
— Wire cutters
— Electrical insulation tape
— 5/16" socket wrench
— Electric drill and drill bits
— Hammer and sheet metal center punch
— 1/4" socket wrench
— 3/8" socket wrench
— 1/4" nut driver
— 7/16" socket driver
— 11/32 Deep Socket
— Flashlight
Nortel recommends that a minimum of two people perform the card cage
upgrade.
Performing the upgrade
81C IGS to CS 1000M MG CP PII FNF Upgrade
Page 45 of 284