Page 254 of 284
Figure 98
Installation Tool quit confirmation
Adding a follower Signaling Server
NN43021-469 Standard 01.01 May 2007
Installing a Signaling Server
14 Enter q to close/terminate the Installation Tool and reboot the Signaling
Server.
After configuration and reboot, a Follower Signaling Server sends out
BOOTP requests and waits for a response. Since the Follower Signaling
Server is not yet configured in an IP Telephony node, there is no BOOTP
response. Do not wait for this response. Complete Procedure 62, "Adding a
Follower Signaling Server to an IP Telephony node," on
End of Procedure
page 255
.