Nortel Meridian Meridian 1 Upgrade Manual page 189

Figure 37
ELAN connection on Ethernet port coupler
Communication Server 1000M and Meridian 1
9 Connect the server to the TLAN subnet.
a. Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the
faceplate of the server.
b. Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c. Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d. Label the Ethernet port coupler as TLAN.
Installing a Signaling Server
81C IGS to CS 1000M MG CP PII FNF Upgrade
Page 189 of 284