Configuring The Secure Router 4134 For Remote Access; Connecting A Terminal For Local Access - Nortel Secure Router 4134 Quick Start Manual

.
Configuring the Secure Router 4134 for
remote access
You must connect a local terminal and log on to the Secure Router 4134 to
initially configure the system.

Connecting a terminal for local access

You use the console port to initially configure the system. The following
figure shows the location of the console port on the rear panel of the
Secure Router 4134.
Figure 6
Connecting a terminal to the Secure Router 4134 console port
To access the command line interface (CLI) using the rear panel console
port, connect a terminal or a workstation that runs terminal emulation
software to the Secure Router 4134 using the console cable that ships with
the unit.
Copyright © 2007, 2008 Nortel Networks
.
Nortel Secure Router 4134
Quick Start
NN47263-100 02.01 Standard
18 February 2008
55