Table of Contents
Advertisement
72
Occupant safety
O If the head restraint of the child seat cannot
be fully extended when it is installed in the
vehicle, this will result in restrictions on the
maximum size setting for child restraint sys-
tems in weight category II or III.
O The child restraint system must not be put
under strain by the head restraint. Adjust the
head restraints as appropriate.
Before every journey, make sure that the ISO-
#
FIX child restraint system or the i‑Size child
restraint system is engaged correctly in both
mounting brackets in the vehicle.
Rear seats
Children up to a height of 1.35 m can travel in the
child restraint system on the rear seats. Children
1.35 m to 1.50 m tall should travel in a suitable
child restraint system on the front passenger
seat.
3
Fold out covers
in the direction of the
#
arrow.
If necessary, pull loop
4
down to detach and
#
remove seat backrest panel 1.
Attach the ISOFIX child restraint system to
#
both mounting brackets in the vehicle 2.
Store seat backrest panels
1
#
When the child seat is removed again, replace
#
covers 3.
Inserting the seat backrest panels:
Hook seat backrest panel
#
guide.
Screw in seat backrest panel
#
in a safe place.
level.
1
into the upper
1
until it is
Advertisement
Table of Contents
