Table of Contents
Advertisement
206 Driving and parking
Briefly press M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced by
10 km/h.
or
Press and hold M on the upper section or
#
N on the lower section of control panel
1.
The stored speed is increased or reduced in
increments of 10 km/h.
or
Accelerate the vehicle to the desired speed.
#
Press M on the upper section of control
#
panel 1.
Adopting the limit speed shown in the driver's dis-
play
Activate Active Distance Assist DISTRONIC or
#
the variable limiter: press M, N or
J.
Accept the displayed speed limit: press J.
#
The limit speed displayed in the driver's dis-
play is adopted as the stored speed. The vehi-
cle adapts its speed to that of the vehicle in
front, but only up to the stored speed, or limits
its speed accordingly.
%
A speed limit shown in the driver display is
only adopted while driving, not when station-
ary.
Pulling away with Active Distance Assist
DISTRONIC
Activate Active Distance Assist DISTRONIC
#
and remove your foot from the brake pedal.
Press J.
#
or
Depress the accelerator pedal briefly and
#
firmly.
The functions of Active Distance Assist
DISTRONIC continue to be carried out.
Reducing or increasing the specified distance
from the vehicle in front
Press K.
#
The h display appears. The specified dis-
tance is reduced by one level.
If the lowest level is already selected, the
selection jumps to the highest level.
Deactivating Active Distance Assist DISTRONIC or
the variable limiter
& WARNING Risk of an accident due to
Active Distance Assist DISTRONIC being
active when you leave the driver's seat
If you leave the driver's seat while the vehicle
is being braked by Active Distance Assist
DISTRONIC only, the vehicle can roll away.
Always deactivate Active Distance Assist
#
DISTRONIC and secure the vehicle to
prevent it from rolling away before you
leave the driver's seat.
Press ±.
#
Advertisement
Table of Contents
