Table of Contents
Advertisement
Pull connector
4
and the hose out of the
#
housing.
Unscrew the cap from the valve on the col-
#
lapsible spare wheel.
1
Screw union nut
of the hose onto the
#
valve.
Make sure on and off switch
#
inflation compressor is set to 0.
Insert connector
4
into the cigarette lighter
#
socket or into a 12 V socket (
your vehicle.
Switch on the power supply (
#
Press on and off switch
#
tion compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is shown
on manometer 2.
Pump the tyre to the specified tyre pressure.
#
%
The specified tyre pressure is printed on the
yellow label of the collapsible spare wheel.
When the specified tyre pressure has been
#
reached, press on and off switch
tyre inflation compressor to 0.
If the tyre pressure is higher than the specified
#
pressure, press pressure release valve button
5
until the correct tyre pressure has been
reached.
3
of the tyre
page 127) in
/
page 156).
/
3
on the tyre infla-
3
on the
Wheels and tyres 377
Advertisement
Table of Contents
