Table of Contents
Advertisement
Adaptive Highbeam Assist Plus automatically
switches between the following types of light:
Low beam
R
Partial high beam
R
High beam
R
Partial high beam does not include other road
users in the high beam area. It does not dazzle
them but enables full high-beam illumination for
the driver apart from the excluded vehicles. Highly
reflective signs are also illuminated with reduced
brightness.
At speeds below 25 km/h or when there is suffi-
cient street lighting:
Partial high beam and high beam will be
R
switched off automatically.
At speeds greater than 30 km/h:
If no other road users are detected, high beam
R
will switch on automatically.
If other road users are detected, partial high
R
beam will switch on automatically.
At speeds above 40 km/h:
If other road users are detected, partial high
R
beam will switch on automatically.
%
The system's optical sensor is located behind
the windscreen near the overhead control
panel.
Switching Adaptive Highbeam Assist Plus on/off
Switching on
Turn the light switch to the à position.
#
Light and sight 141
Switch on high beam using the combination
#
switch.
If Adaptive Highbeam Assist Plus is activated,
the _ indicator lamp will light up on the
driver's display. When partial high beam or
high beam is active, the corresponding blue
indicator lamp will also light up.
Switching off
Switch off high beam using the combination
#
switch.
Setting low beam
Multimedia system:
©
Settings
Lights
4
5
5
DIGITAL LIGHT
Low beam
5
5
%
For vehicles without DIGITAL LIGHT head-
lamps, low beam can be set in the
menu.
Select
Right-side
traffic,
Left-side traffic
#
Automatic.
Spotlight
or
Advertisement
Table of Contents
