Table of Contents
Advertisement
mentation of the product: Head of the Technical
Department Brano a.s.
4.
Hradec nad Moravicí
Place
5.
05.10.2020
Date
Engineer Petr Petr
[Signature]
Director of division ZZ
TIREFIT kit
Copy and translation of the original declaration of
conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0851ve, DT/UW 200046 -
IBK-LK2
MB part no.: A 000 583 8200
complies with the following relevant regulations:
2014/30/EU
Applied harmonised standards, in particular:
DIN EN 55014-1: 2012
DIN EN 55014-2: 2016
Manufacturer: Dunlop Tech GmbH
Address: Offenbacher Landstrasse 8, 63456
Hanau
Authorised representative: IMS dept.
Date: December 2019
Signature: IMS-AE, IMS-AE-L
Diagnostics connection
The diagnostics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
General notes
devices should therefore only be connected in a
qualified specialist workshop.
& WARNING Risk of accident due to con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of the vehicle, the function of vehicle
systems and operating safety may be
impaired.
For safety reasons, we recommend that
#
you only use and connect products
approved by a Mercedes-Benz service
centre.
& WARNING Risk of accident due to objects
in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle.
35
Advertisement
Table of Contents
