Table of Contents
Advertisement
Position of the jack support points
& WARNING Risk of injury from incorrect
positioning of the jack
If you do not position the jack correctly at the
appropriate jacking point of the vehicle, the
jack could tip with the vehicle raised.
Only position the jack at the appropriate
#
jacking point of the vehicle. The base of
the jack must be positioned vertically
under the jacking point of the vehicle.
* NOTE Damage to the vehicle due to the
jack
If you do not position the jack at the jack sup-
port points provided for this purpose, you
could damage your vehicle.
Only position the jack at the jack sup-
#
port points provided for this purpose.
Take the ratchet out of the tyre-change tool kit
#
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
Wheels and tyres 371
2
Position support
of jack
#
port point 1.
Turn ratchet
3
clockwise until support
#
sits completely on jack support point
the base of the jack lies evenly on the ground.
Turn ratchet
3
until the tyre is raised a maxi-
#
mum of 3 cm from the ground.
Loosen and remove the wheel (
#
4
on jack sup-
2
1
and
page 372).
/
Advertisement
Table of Contents
