Table of Contents
Advertisement
The ç symbol (yellow) appears when the
R
vehicle is at a standstill: not all vehicle condi-
tions for an engine stop have been met.
Neither the è symbol nor the ç symbol
R
appears when the vehicle is at a standstill: an
intelligent stop inhibitor, e.g. a stop sign, has
been detected.
The s symbol appears: the ECO start/stop
R
function is deactivated or there is a malfunc-
tion.
If the engine was switched off by the ECO start/
stop function and you leave the vehicle, a warning
tone will sound and the engine will not be restar-
ted. In addition, the following display message will
appear on the driver's display:
Vehicle is operational Switch off vehicle before
exiting
If you do not switch off the vehicle, it will automat-
ically be switched off after three minutes.
Switching the ECO start/stop function on/off
Deactivating or activating function using the
start/stop button
Press button 1.
#
A display will appear on the driver's display
when you switch the ECO start/stop function
on/off.
Driving and parking 165
%
s will be continuously shown on the driv-
er's display while the ECO start/stop function
is deactivated.
Deactivating or activating the function via the
steering-wheel button
Repeatedly press the upper or lower display
#
2
button
until the display button displays the
è symbol.
%
If the display button does not show the sym-
bol, then it is hidden. How functions are dis-
played and the order in which they are dis-
played can be set in the multimedia system
(
page 169).
/
Advertisement
Table of Contents
