Table of Contents
Advertisement
66
Occupant safety
Approval categories in accordance with UN-R129
Example of an approval label
i‑Size: child restraint systems in the "i‑Size"
R
category are approved for installation in vehi-
cles with i‑Size mounting brackets. They can
be used, in accordance with overviews of the
suitability of seats for securing child restraint
systems, on seats labelled i‑U.
The identification i‑U refers to i‑Size child
restraint systems in the "Universal" category.
These child restraint systems must also be
secured using Top Tether or support points.
Observe the suitability of vehicle seats
Depending on the approval category, there are
forward-facing and rearward-facing child restraint
systems. Their use can be restricted for certain
vehicle seats:
Suitability of seats for attaching ISOFIX child
R
restraint systems (
page 66)
/
Suitability of seats for securing i‑Size child
R
restraint systems (
page 70).
/
Suitability of seats for attaching belt-secured
R
child restraint systems (
page 74)
/
ISOFIX and i-Size child seat securing systems
Overview of the suitability of seats for attaching
ISOFIX child restraint systems to the front
passenger and rear seat
ISOFIX is a standardised securing system for spe-
cially designed restraint systems.
® The symbol indicates seats suitable for
attaching an ISOFIX child restraint system
in accordance with UN R44 (
Attach only child restraint systems that are
approved in accordance with UN R44 as
per the following ISOFIX tables.
Notes on child restraint systems on the front
passenger seat
If it is absolutely necessary for you to fit a
R
child restraint system to the front passenger
seat, be sure to observe the information on
child restraint systems on the front passenger
seat (
page 77).
/
Observe the specific instructions for the rear-
R
ward-facing and forward-facing child restraint
systems. If the front passenger seat is occu-
pied, ensure, both before and during the jour-
page 65).
/
Advertisement
Table of Contents
