250 Driving and parking
When the vehicle is stationary, indicated vehicle
path
4
into currently selected parking space
also appears.
If a parking space is displayed: stop the vehi-
#
cle.
If necessary, select another parking space.
#
Vehicles with 360° Camera: to change the
#
parking direction, tap the selected parking
space again.
To start the parking procedure: press button
#
1
again.
The vehicle drives into the selected parking
space.
The turn signal indicator is switched on automati-
cally when the parking procedure begins. You are
responsible for selecting the turn signal indicator
in accordance with the traffic conditions. If neces-
sary, select the turn signal indicator accordingly.
& WARNING Risk of accident due to vehicle
swinging out while parking or pulling out
of a parking space
5
While parking or exiting a parking space, the
vehicle swings out and can drive onto areas of
the oncoming lane.
This could cause you to collide with objects or
other road users.
Pay attention to objects and other road
#
users.
Where necessary, stop the vehicle or
#
cancel the parking procedure with Active
Parking Assist.
On completion of the parking procedure, the
Active Parking Assist finished
display message
appears.
Secure the vehicle against rolling away. When
#
required by legal requirements or local condi-
tions: turn the wheels towards the kerb.
%
You can stop the vehicle and change the
transmission position during the parking pro-
cedure. The system then calculates a new
vehicle path. If no new vehicle path is availa-
ble, the transmission position can be changed
again, or the process can be cancelled.