If data is not stored normally
[Error] is displayed.
1-4-4.
PC Setting
When upgrading the software, kernel, and FPGAs or performing process after replacing the each board or OLED
module, make the PC setting.
Equipment required
• Personal computer (PC)
OS: Windows 7 or Windows8, Windows8.1
• LAN cable (cross cable)
Note
This section describes with an example of the updating procedure in Windows 7. In the Windows OS except Windows7,
the screen display may be different.
Procedure
1.
Boot the PC.
2.
Set Wi-Fi to OFF.
3.
Click [Start], click [Control Panel], click [Network and Sharing Center], and then click [Change adapter settings].
4.
Right-click [Local Area Connection] and select [Properties].
The Local Area Connection Properties screen appears.
BVM-E171
7
7
1-7