NG
Flexible flat cable
1-6-2.
Disconnecting/Connecting the Fine-Wire Coaxial Cable
Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is not contaminated.
Disconnecting
1.
While pushing the two lugs in the direction of the arrow A, pull out the connector straight in the direction of the
arrow B.
Fine-wire coaxial cable
Lug
A
Connecting
1.
Insert the connector as far as it will go.
Fine-wire coaxial cable
BVM-E171
Guide
Lug
A
Connector
B
Connector
NG
Guide
OK
NG
Guide
OK
Hold the connector to remove.
NG
Do not attempt to remove by
pulling the cables.
Guide
1-16