Adjusting The Picture's Position Manually (V Center) (For Tv/Component/Video 1/Video 2 Only); Changing The Display Resolution (Resolution) (For Pc 2 Only); Option Menu; Setting "Pip" (Picture In Picture) Or "Pap" (Picture And Picture) (For Pc 1/Pc 2 Only) - Sony MFM-HT205 Owner's Record

x Adjusting the picture's position manually
(V Center) (for TV/COMPONENT/VIDEO 1/
VIDEO 2 only)
If you want to adjust the picture position up or down, when
"14:9," "Wide Zoom," or "Zoom" is selected, adjust the picture's
centring as follows.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "V Center" and
press the OK button.
The "V Center" adjustment menu appears on the screen.
4 Press the M/m buttons to adjust the picture position
where you like.
x Changing the display resolution
(Resolution) (for PC 2 only)
You can change the display resolution when the current input is
different from the one displayed on the screen.
Tip
Some of the output signals from your computer may not be recognized on
the display by assigning the default setting of resolution. The actual
resolution may not be displayed as you have selected. Use this function
only when you want to change the display resolution.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the M/m buttons to select "Resolution" and
press the OK button.
The "Resolution" menu appears on the screen.
Screen
Zoom :
Auto Adjust
Phase :
Pitch :
H Center :
V Center :
Resolution
Select
4 Press the M/m buttons to select the resolution you
want to display, and press the OK button.
(Screen) and
(Screen) and
HD15: PC 2
Full
30
0
50
50
1680 × 1050
1400 × 1050
1680 × 1050/60 Hz
Set Exit
OK MENU

Option menu

You can adjust the following items using the "Option" menu.
• PIP/PAP
• TeleText
• Input Sensing
• Language
• Menu Position
• Menu Lock
• Demo Mode
• All Reset
x Setting "PIP" (Picture In Picture) or "PAP"
(Picture And Picture) (for PC 1/PC 2 only)
When the "PIP/PAP Setting" menu is set to "PIP On" or "PAP
On," pictures from two input sources are displayed on the screen
at the same time. When "PIP On" is set, the main picture is
displayed in full size, and the sub picture is displayed smaller in
the corner of the screen. When "PAP On" is set, two same-size
pictures are displayed in the centre of the screen. The left screen
shows the main picture, the right screen shows the sub picture.
Also, you can choose either the sound from the main picture or the
sub picture.
Tip
You can also switch the "PIP" or "PAP" setting by pressing the
button repeatedly.
To switch the PIP or PAP function on and off
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP/PAP" and
press the OK button.
4 Press the M/m buttons to select "PIP/PAP Setting"
and press the OK button.
The "PIP/PAP Setting" menu appears on the screen.
Option
PIP/PAP
PIP/PAP Setting :
PIP/PAP :
PIP Size :
PIP Position
Audio Select :
5 Press the M/m buttons to select the desired mode
and press the OK button.
• PIP On: Pictures from two input sources are displayed
on the screen. The main picture is displayed in
full size, and the sub picture is displayed
smaller in the corner of the screen. You can
select the input for sub picture, the sub picture's
position, size, and audio input source.
27
Option DVI-D: PC 1
PIP/PAP
TeleText :
Input Sensing : On
Language : English
Menu Position
Menu Lock : Off
Demo Mode : Off
All Reset
1680 × 1050/60 Hz
Select Set
OK
(Option) and
DVI-D: PC 1
PIP On
PAP On
Off
1680 × 1050/60 Hz
Select Set Exit
OK MENU
Exit
MENU
GB