Kernel data writing procedure
1.
Turn off the controller. (Disconnect the power cable from the DC plug.)
2.
Turn on the controller. (Connect the power cable to the DC plug.)
3.
Setup BVM_HAB_TOOL.
4.
Select "Image File" in the [File type] field.
5.
On the [Com port] tab window, set the PC's COM port to be used.
6.
Click [Browse] and set the kernel data to be written.
Kernel data: vxWorks_rom.bin
7.
Click [Download].
Start writing.
Note
When a message "all process succeeded" appears, data writing has been completed.
8.
Turn off the controller. (Disconnect the power cable from the DC plug.)
9.
Set switch 1 of the DIP switch (S1000) on the HC board to OFF.
BVM-E171
5-15