4-2.
Tightening Torque
Tighten the each screw with the torque below.
• B3 x 5 (for BA cover block): 0.40 ±0.10 N·m
• B3 x 5 (for excluding BA cover block): 0.80 ±0.10 N·m
• B3 x 6: 0.80 ±0.10 N·m
• B4 x 6: 1.40 ±0.20 N·m
• K3 x 5: 0.80 ±0.10 N·m
• K4 x 20: 1.40 ±0.20 N·m
• RK2.6 x 6: 0.53 ±0.07 N·m
• PS4 x 14: 1.40 ±0.20 N·m
• PSW3 x 6: 0.80 ±0.10 N·m
• PSW3 x 12: 0.80 ±0.10 N·m
• PSW4 x 8: 1.40 ±0.20 N·m
• PSW4 x 10: 1.40 ±0.2 N·m
• Hexagon socket head cap screw (FH3 x 8): 0.40 ±0.10 N·m
Tip
When using the torque driver with the notation of cN· m, interpret it as follows.
Example: 0.8 N·m = 80 cN·m
BVM-E171
4-2