4-3.
Rear Cover Assembly
Procedure
1.
Remove the two screws (B4 x 6), then remove the handle.
2.
Remove the 13 screws (B4 x 6) and four screws (PSW4 x 10), then remove the rear cover assembly.
3.
Remove the two screws (PSW4 x 8), then remove the two front leg assemblies.
Handle
B4 x 6
B4 x 6
Upper side
4.
Install the removed parts by reversing the steps of removal.
BVM-E171
B4 x 6
PSW
4 x 10
Rear cover
assembly
B4 x 6
B4 x 6
Front leg assembly
Front leg assembly
PSW
4 x 8
PSW
4 x 8
4-3