Trusted Mac - NETGEAR ProSafe GS108 User Manual
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
GS108T Smart Switch Software Administration Manual
.
Figure 4-56
2. The Port Security page contains the following fields:
•
Port: Indicates the port number.
•
Learning Mode: Allows to enable/disable learning on the port.
•
Action: Specifies the action to Forward or Discard unknown source mac address packets.
Limited Learning dynamically learns 16 MAC addresses and stop learning hereafter.
•
Trap: Specifies whether to send trap notification to logging servers when security
violation occurs.
3. Click Apply.
Trusted MAC
The Trusted MAC protects the device from untrusted intruder invade the system. Only the SA of
the packet in the trusted MAC table can be switched to the destination port. The trusted MAC is
configured by the user; it is per port based; and total 100 trusted MACs can be added.
Click Trusted MAC in the blue navigation panel. A screen similar to that shown below appears.
4-40
v1.0, May 2007
Configuring the Switch
Hide quick links:
Advertisement
Table of Contents
