Port Security - NETGEAR ProSafe GS108 User Manual
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
.
Figure 4-55
2. The DOT1x Statistics Page contains the following fields:
•
Port: Indicates the port that is polled for statistics.
•
Session Octet Received: Indicates the number of bytes received on the port.
•
Session Octet Transmit: Indicates the number of bytes transmitted via the port.
•
Session Authentication Method: Specifies the authentication method used for port
authentication.
•
Session Time: Indicates the time elapsed since the session is established.
•
Session Terminate Cause: Indicates the reason for which the port authentication was
terminated.
•
Session User Name: Indicates the session user name
Port Security
The Port Security page allows you to enable/disable port learning. If the learning mode is disabled,
you can configure the action for unknown source MAC address packets.
1. Click Port Security in the blue navigation panel. A screen similar to that shown below
appears.
Configuring the Switch
GS108T Smart Switch Software Administration Manual
v1.0, May 2007
4-39
Hide quick links:
Advertisement
Table of Contents
