NETGEAR ProSafe GS108 User Manual page 26
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
GS108T Smart Switch Software Administration Manual
.
Figure 3-3
2. View the basic system information:
•
Product name shows the switch model name.
•
Firmware Version displays the software version of the switch.
•
Protocol Version is the discovery version of the switch.
•
DHCP indicates the enabled/disabled state of DHCP client functionality.
•
BootP Client indicates the enabled/disabled state of BootP client functionality.
•
IP Address indicates the IP address of the switch.
•
Subnet Mask is the subnet mask of the IP address.
•
Default Gateway is the IP address of the gateway for the remote manager.
•
MAC Address indicates the MAC address of the switch.
•
System Name shows the switch name set by user.
•
Location Name shows where the switch located.
•
Login Timeout (minutes) defines the web login timeout time of the switch.
•
System Up time defines the switch up time after boot up.
3. Scroll down to view additional status information:
•
IP Access List Setting
3-2
v1.0, May 2007
Managing System Settings
Hide quick links:
Advertisement
Table of Contents
