Table of Contents
Advertisement
Technical Support
Please refer to the Support Information card that shipped with your product.
By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only)
For other countries see your Support Information card.
E-mail: Support@NETGEAR.com
Website: www.NETGEAR.com
© 2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or
other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
M - G S 1 0 8 N A - 0
Advertisement
Table of Contents
Related Manuals for NETGEAR ProSafe GS108
Summary of Contents for NETGEAR ProSafe GS108
-
Page 1: Technical Support
Website: www.NETGEAR.com © 2002 by NETGEAR, Inc. All rights reserved. NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. -
Page 2: Installation Guide
8-Port Switch GS108 10/100/1000 Mbps Gigabit Ethernet Installation Guide... -
Page 3: Installation Overview
Each port on the GS108 switch automatically configures itself correctly when you plug in a device’s cable. If you have a problem with your switch, NETGEAR offers technical support 24 hours a day and 7 days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by phone (see the provided support information card for phone numbers). -
Page 4: Unpacking Box And Verifying Contents
If you don’t have everything listed above, see the support information card for contact information. If you’re missing the support information card itself, get contact information at www.NETGEAR.com in the Customer Service area Model GS108 8-Port 10/100/1000 Mbps Gigabit Ethernet Switch... -
Page 5: Prepare To Install The Switch
Prepare to Install the Switch Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf. The switch comes with wall-mounting screws. You’re welcome to use the screws if you want to hang the switch in an open space on a wall. -
Page 6: Install Switch And Connect Other Devices
Ethernet ports on the switch. 3. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip). -
Page 7: Troubleshooting
If the socket is controlled by a light switch, make sure the switch is in the on position. • Make sure you are using the NETGEAR power adapter supplied with your switch. The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem. -
Page 8: Statement Of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.