Unknown Multicast - NETGEAR ProSafe GS108 User Manual
Gigabit smart switch
Hide thumbs
Also See for ProSafe GS108:
- User manual ,
- Installation manual (9 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
GS108T Smart Switch Software Administration Manual
•
IGMP Function: allows to enable/disable the IGMP snooping feature per switch. This
feature is disabled by default.
•
Dynamic Multicast Entry Table: displays the Dynamic Layer 2 multicast entries.
VID is VLAN ID.
•
Multicast Entry: Layer 2 multicast group address.
•
Member Port(s): the membership associated with the group.
3. Click Apply.
Unknown Multicast
The Unknown Multicast page allows you to enable or disable the unknown multicast flooding
feature.
1. Click Unknown Multicast in the blue navigation panel. A screen similar to that shown below
appears.
.
Figure 4-49
2. Enable or disable the unknown multicast flooding feature.
3. Click Apply.
4-30
v1.0, May 2007
Configuring the Switch
Hide quick links:
Advertisement
Table of Contents
