NETGEAR ProSafe GS108 User Manual page 86

GS108T Smart Switch Software Administration Manual
Properties
The Network Authentication Properties page allows network managers to configure port
authentication parameters. Guest VLANs are also enabled from the Network Authentication
Properties page.
1. Click Properties in the blue navigation panel. A screen similar to that shown below appears.
.
Figure 4-51
2. The Port Authentication Properties Page contains the following fields:
• Port-based Authentication State: Indicates if Port Authentication is enabled on the
device. The possible field values are:
– Enable: Enables port-based authentication on the device.
– Disable: Disables port-based authentication on the device.
• Authentication Method: Specifies the authentication method used for port
authentication. The possible field values are:
– None: Indicates that no authentication method is used to authenticate the port.
– RADIUS: Provides port authentication using the RADIUS server.
4-32
v1.0, May 2007
Configuring the Switch