GS108T Smart Switch Software Administration Manual
•
Port Description: Indicates the description for the port.
4. Click Next Port to set the configuration settings of the next port.
5. Click Apply to update the port configuration settings.
Statistics
This page shows information from each port's internal counters.
1. Click Statistics in the blue navigation panel. A screen similar to that shown below appears.
.
Figure 4-26
The following statistics are displayed for all of the ports:
•
Tx indicates total packets transmitted from a port.
•
Rx indicates total packets received from a port.
Clear Counters resets all counters to zero.
Refresh retrieves current count from the device and updates the page.
2. To view an individual port in detail, click that port number. A screen similar to that shown
below appears.
4-4
v1.0, May 2007
Configuring the Switch