Vlan - NETGEAR ProSafe GS108 User Manual

GS108T Smart Switch Software Administration Manual

VLAN

Click VLAN in the middle part of the blue navigation panel to expand the item to VLAN Group
Setting and Management VLAN.
VLAN Group Setting
Possible VLAN group settings include IEEE 802.1Q VLAN and port-based VLAN.
IEEE 802.1Q VLAN
The settings on the IEEE 802.1Q VLAN page control the VLAN membership of each port for
transmitting packets. Also, these settings determine if transmitted packets from each port are
tagged with the VLAN ID and other information. The switch supports 64 Tag-based VLANs.
By default, every port is a member of VLAN 1 and so they have a Port VLAN ID (PVID) of 1.
Click VLAN Group Setting in the blue navigation panel. A screen similar to that shown below
appears when IEEE 802.1Q VLAN is selected for the VLAN group setting.
.
Figure 4-30
You can add, change, or delete VLANs and ports.
Configuring the Switch 4-9
v1.0, May 2007